Operation and water consumption of cooling towers
Water evaporation accounts for 70% – 80% of the water consumed in cooling towers.
The actual amount of water evaporated is determined by the wet-bulb temperature and by the cooling demand of the system.
Upon evaporation, the water leaves behind salts, carbonates and other solids, that are added to those contained in the water remaining in the circuit, gradually increasing their concentration.
To control the concentration of salts and carbonates and other dissolved solids, it is required to purge water from the basin. This water blow-down represents approximately 20-30% of the water consumed in the towers.
The cooling tower also acts as a mighty air cleaner, absorving dirt and bacteria suspended in the air which accumulate at the basin of the cooling tower.
Energy Efficiency of Cooling Towers
The performance of a cooling tower degrades when the efficiency of the heat transfer process declines. When water evaporates from the cooling tower, the remaining minerals leave scale deposits on the surface of the tower fill. This scale build-up acts as a barrier that prevents the transfer of heat from the water to the air.
Dirt, algae and sediment gather in the water basin together with the remaining minerals from the evaporated water, and travel through the cooling water circuit creating deposits and even clogging the spray nozzles. This causes uneven water distribution over the filling, resulting in uneven air flow and a reduced heat transfer surface area.
The reduced heat transfer capacity reduces the working efficiency of the towers and the energy efficiency of the condensing system (i.e. power consumption of the compressor).
Disadvantages of chemical water treatment
- Fails to remove all the dirt and keep clean of scale the cooling tower’s fill, affecting the cooling efficiency of the tower.
- Requires to maintain low cycles of concentration, resulting in larger water consumption due to blow-down.
- High cost.
- Limited reuse of blow-down water.
- Harms the environment.
SRCT-LS for 5000 TR+ cooling towers
SRCT-LS employs advanced electrolytic and filtering technologies to provide a cost effective and environmentally friendly solution that maintains cooling towers clean, free of scale and bio-fouling.