Continues Oxidation and Electro – Chlorination System for Drinking Water Disinfection Auto Self–Cleaning Mechanism (Pat Pend) No need for Chemicals or Soft Water
CQM’s SR-DW Electro chlorination System for Drinking Water employs the latest technologies to provide a cost effective, environmentally friendly solution to disinfect drinking water by inline continues production of chlorine. This is accomplished without using chemical additives or continuous replacement of expensive filters or membranes. The SR-DW system uses the chemical reactions caused by electrolysis to promote electrochlorination and electro-oxidation which produce chlorine and oxidants with powerful bactericide effect, delivering drinking water according to the strictest standards.
Disinfection by Electro-chlorination system and Electro-oxidation
The electrochlorination system is used as an alternative to the dosing of chlorine gas, and offers logistical and safety benefits. The risks inherent to the transportation, handling and storage of chlorine gas or sodium hypochlorite solutions, are eliminated. In the electrolysis process, electric current passes between two electrodes (anode and cathode) using water as the conductor. The electric current induces controlled chemical reactions that take advantage of the salts, carbonates and minerals in the water to produce disinfectants in quantities large enough to ensure that the water quality meets the desired chlorine concertation as required by the regulator.
Proven Solution – Installed and working at satisfied customers
Approved by Health Regulators in Europe.
CQM’s technology is used in a multitude of private and public buildings as well as municipalities to ensure that the water delivered through the pipe meets the requirements for safe human consumption.
According to the supply water quality, SR-DW can be installed as a brine-free or brine-add system for larger treatment capacity. Actual capacity shall be determined on the basis of analysis of treated water.
Description and Data Sheet
Chlorination System for Drinking Water – for Warm and Hot Water Disinfection
CQM’s SRBL Bactericide and Legionella Disinfection System employs the latest technologies to provide a cost effective, environmentally friendly solution to disinfect hot water recirculating circuits. This is accomplished without using chemical additives.
The SRBL system uses electro-chlorination and electro-oxidation reactions induced by electrolysis to generate chlorine and other oxidants with powerful bactericide characteristics, which completely eliminate legionella and bacteria in hot water circuits.